GJXFH(V) Stripped,The optical fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP) are placed at the two sides. A steel wire as the additional strength member is also applied. Then the cable is completed with a black or color LSZH sheath,There is a recognition guide at the bottom of the cable.
Mini figure 8 cable mini F-SST contains mini F-SST as optical fiber unit, which promotes maximum core to 24. According to different applications, it is jacketed by LSZH, PE or PA. Mini F-SST cable has small size and low weight. With perfect mechanical performance and wide temperature and wide temperature range, it can withstand the strong pressure. And is suitable for indoor cabling, pipelines and ground slot laying.
Loose Buffered Fiber is produced as that fiber is sheathed by buffer material.The selection of top-quality fiber, the specific production equipment and the accurately designed to make the performance of product.
Mini air-blown cable, fiber optic is coloring 2-24 core fiber placed in the bundle tube, the outer skin extruded a layer of high-density polyethylene outer sheath.
GJAFKV FRP ,The structure of the optical fiber cable is a multi-strand aramid fiber reinforced with a multi-core bundle mini ф250μm optical fiber surface. A layer of PVC or LSZH inner sheath is extruded on the stranded surface as a subunit, the subunit is wound with a layer of steel wire armor, The sub-unit and the non-metallic reinforcements FRP (and possible mats) are stranded in a circle, wrapped with a dry water-blocking tape between the core and the sheath, and finally the PVC (or LSZH) sheath is extruded cable.
ADSS cable adopts the twisted structure of loose sleeve layer, 250 μm optical fiber is inserted into the loose tube made of high modulus materials, and the loose tube is filled with waterproof compounds. The loose tube ( and filling rope ) is twisted around the non-metallic center reinforcing core ( FRP ) to synthesize a compact cable core. The gap of the cable core is filled with a water-blocking yarn and a water-blocking belt longitudinally wrapped by the cable core, and then the aramid fiber that plays a reinforcing role is twisted. Finally, the polyethylene ( PE ) outer sheath or the electric mark ( AT ) outer sheath is extruded.