Hot Product

Featured

  • Premium Quality Fiber Splitter: LC/APC Single Mode Fiber Optic Adapter by Fcjoptic

    Premium Quality Fiber Splitter: LC/APC Single Mode Fiber Optic Adapter by Fcjoptic

    Fiber optic adapter, sometimes also called coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines. By linking two connectors precisely, fiber optic adapters allow the light sources to be transmitted at most and lower the loss as much as possible. At the same time, fiber optic adapters have the merits of low insertion loss, good interchangeability and reproducibility. FCJ OPTO supplies a wide range of mating sleeves and hybrid adapters, including special male to female hybrid fiber optic adapter.


    inquirydetail
  • High-Grade 1*4 Splitter FTTH Fiber Optic Cable – Unrivalled Transmission Power

    High-Grade 1*4 Splitter FTTH Fiber Optic Cable – Unrivalled Transmission Power

    GJYXFCH(V) Steel ,Fiber Optic Drop Cable access to the use of dish-shaped optical cable (indoor wiring) is the optical communication unit (fiber) in the center, placed on both sides of two parallel non-metallic reinforcement (FRP) or metal reinforcing member, and finally extrusion black or color poly Vinyl chloride (PVC) or LSZH (LSZH, low smoke, halogen-free, flame retardant) jacket.


    inquirydetail
  • High-Performance 1X4 Splitter 300μm Tight Buffered Optic Fiber Cable by FCJ OPTO TECH

    High-Performance 1X4 Splitter 300μm Tight Buffered Optic Fiber Cable by FCJ OPTO TECH

    The 300μm Tight buffered fiber optical cable is made of Hytrel-7246 grade material, with a layer of Hytrel material extruded from a 200 / 250μm fiber to provide the ideal choice for high-density fiber optic cable.


    inquirydetail
  • Premium Stainless Steel Patch Cord OPGW Fiber Cables by FCJ Optotech

    Premium Stainless Steel Patch Cord OPGW Fiber Cables by FCJ Optotech

    Stainless Steel Tube F-SST(Optical fiber composite stainless steel loose tube) is one kind of seamless tube, which is made of stainless steel, after laser longitudinal welding and jelly filling in the middle. With marvelous performance of longitudinal water resistance, the tube is perfect to maintain good protection of optical fiber. It is especially designed for harsh environments, and can be used for various applications from oil well to military, underwater, fire resistant, and anti-rodent facilities etc. It is suitable for the direct use or basis use or basic optical units of fiber cable.


    inquirydetail
  • High-Quality FRP Strength Member Jet Micro Fiber Optic Cable by Fcjoptic

    High-Quality FRP Strength Member Jet Micro Fiber Optic Cable by Fcjoptic

    The fibers,250μm, either of single-mode or multimode type, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A layer of aramid yarn or high strength glass is applied around the cable core as additional strength member. Then, the cable is completed with a black or color HDPE sheath.So this is Light-armored Communication Cable.


    inquirydetail
  • FRP Strength Member for Fiber Optic Cables — Stainless Steel Cable by Fcjoptic

    FRP Strength Member for Fiber Optic Cables — Stainless Steel Cable by Fcjoptic

    Stainless Steel Tube F-SST(Optical fiber composite stainless steel loose tube) is one kind of seamless tube, which is made of stainless steel, after laser longitudinal welding and jelly filling in the middle. With marvelous performance of longitudinal water resistance, the tube is perfect to maintain good protection of optical fiber. It is especially designed for harsh environments, and can be used for various applications from oil well to military, underwater, fire resistant, and anti-rodent facilities etc. It is suitable for the direct use or basis use or basic optical units of fiber cable.


    inquirydetail
  • Mini Breakout Fiber Optic Pigtail: Upgrade with GYTA Armoured Outdoor Cable

    Mini Breakout Fiber Optic Pigtail: Upgrade with GYTA Armoured Outdoor Cable

    GYTA Outdoor ,The fibers, 250μm,are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then, the cable is completed with a PE sheath.


    inquirydetail
  • Superior Quality GYFXY Non-Metallic Unitube Fiber Optic Patch Cord for Aerial Outdoor Settings

    Superior Quality GYFXY Non-Metallic Unitube Fiber Optic Patch Cord for Aerial Outdoor Settings

    GYFXY Non-metallic ,The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. Over the tube. water-blocking material is applied to keep the cable watertight. Two parallel Fiber Reinforced Plastics (FRP) are placed at the two side. The cable is completed with a polyethylene(PE) sheath.


    inquirydetail
  • Robust LSZH PFiber Optics - GYFTY53 Stranded Loose Tube Core Cable

    Robust LSZH PFiber Optics - GYFTY53 Stranded Loose Tube Core Cable

    1.GYFTY53 uses a Fiber Reinforced Plastic (FRP) as central strength member to provides anti-electromagnetic interference property.

    2.The armored structure protects the cable from rat bite and moisture proof.

    3.The tubes (and fillers) are stranded around the strength member into a compact and circular core.

    4.Then the cable core is covered with a thin polyethylene (PE) inner sheath, which is filled with jelly to protect it from water ingress.

    5.A layer of water-blocking material is applied around the cable core to prevent water ingress.


    inquirydetail
  • Duplex Patch Cord: GYXTC8S Aerial Overhead Self-Supported Fiber Optical Cable

    Duplex Patch Cord: GYXTC8S Aerial Overhead Self-Supported Fiber Optical Cable

    The fibers, 250μm,are positioned in a loose tube made of a high modulus plastic, the tubes are filled with a water-resistant filling compound. The two sides PSP are longitudinally applied over the outer loose tube.  loose tubes filled with water proof compound to ensure compact and longitudinally water blocking ,this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene(PE) sheath to be figure 8 structure.


    inquirydetail
  • LC Upc APC Patch Cord: Experience Quality with FCJ OPTO TECH's ADSS Fiber Optic Cable

    LC Upc APC Patch Cord: Experience Quality with FCJ OPTO TECH's ADSS Fiber Optic Cable

    ADSS cable adopts the twisted structure of loose sleeve layer, 250 μm optical fiber is inserted into the loose tube made of high modulus materials, and the loose tube is filled with waterproof compounds.  The loose tube ( and filling rope ) is twisted around the non-metallic center reinforcing core ( FRP ) to synthesize a compact cable core. The gap of the cable core is filled with a water-blocking yarn and a water-blocking belt longitudinally wrapped by the cable core, and then the aramid fiber that plays a reinforcing role is twisted. Finally, the polyethylene ( PE ) outer sheath or the electric mark ( AT ) outer sheath is extruded.


    inquirydetail
  • Advanced Optic Fiber Patch Cord – The Efficient Optoelectronic Hybrid Cable Solution

    Advanced Optic Fiber Patch Cord – The Efficient Optoelectronic Hybrid Cable Solution

    FCJ Copper/Fiber Composite cable consists of flexible stranded Copper conductors and integrating communications links utilizing Fiber Optic technologies.  The breakout design provides additional protection for both the copper and fiber channels by individually protecting each with insulated jackets and all-dielectric strength members.  For applications requiring remote low-voltage power and high-speed communications, these designs provide an efficient single-installation option where space is of a premium and devices are not easily accessed

    Optical Power Composite Cable ,the fibers 250μm,are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The cable core is FRP or metallic strength member( some structures need add PE as bedding layer in the strength member). Electric wires and tubes (and fillers) are stranded around the strength member into a compact and circular cable core. The cable core is filled with the filling compound to protect it from water ingress. After two sides PSP are longitudinally applied over the inner sheath ,the cable is completed with PE or LSZH outer sheath.


    inquirydetail
4877 Total
Leave Your Message