Hot Product

Featured

  • Advanced Fiber Optic Adapter - LC/APC Single Mode Design Without Flange

    Advanced Fiber Optic Adapter - LC/APC Single Mode Design Without Flange

    Fiber optic adapter, sometimes also called coupler, is a small device designed to terminate or link the fiber optic cables or fiber optic connectors between two fiber optic lines. By linking two connectors precisely, fiber optic adapters allow the light sources to be transmitted at most and lower the loss as much as possible. At the same time, fiber optic adapters have the merits of low insertion loss, good interchangeability and reproducibility. FCJ OPTO supplies a wide range of mating sleeves and hybrid adapters, including special male to female hybrid fiber optic adapter.


    inquirydetail
  • Premium Quality China Outdoor 24 48 Core GYTA53 Armoured Singlemode Fiber - Fcjoptic's Specialty

    Premium Quality China Outdoor 24 48 Core GYTA53 Armoured Singlemode Fiber - Fcjoptic's Specialty

    ·Multi fiber armored optical fiber cable has a layer of stainless steel wires enhance the crush resistance of the cable and anti-rodent
    ·High strength aramid yarn,high performance outer sheath
    ·Light weight,flexibility,and friendly installation.
    ·Good mechanical and environmental performance.
    ·Flame retardant outer sheath provide good safety.


    inquirydetail
  • Premium Indoor Armoured Fiber Optic Cable by Fcjoptic

    Premium Indoor Armoured Fiber Optic Cable by Fcjoptic

    GJAFKV FRP ,The structure of the optical fiber cable is a multi-strand aramid fiber reinforced with a multi-core bundle mini ф250μm optical fiber surface. A layer of PVC or LSZH inner sheath is extruded on the stranded surface as a subunit, the subunit is wound with a layer of steel wire armor, The sub-unit and the non-metallic reinforcements FRP (and possible mats) are stranded in a circle, wrapped with a dry water-blocking tape between the core and the sheath, and finally the PVC (or LSZH) sheath is extruded cable.


    inquirydetail
  • High-Performance Fiber Optic Indoor Patch Cord - OM3 Multi Model Cable by Fcjoptic

    High-Performance Fiber Optic Indoor Patch Cord - OM3 Multi Model Cable by Fcjoptic

    GJFV 2-24 OM3 Colored cable is made by evenly applying strands of Aramid yarns as the strength member over ф250μm fibers.,twisting fibers with aramid yarn,then is completed with PVC(LSZH)jacket.


    inquirydetail
  • FTTH Indoor Cable - Fcjoptic's Single Fiber Simplex Indoor Optic Cables

    FTTH Indoor Cable - Fcjoptic's Single Fiber Simplex Indoor Optic Cables

    GJFJV SX Tight indoor fiber optic cable is made by evenly applying strands of Aramid yarns as the strength member over ф900μm or ф600μm tight buffer fibers and then is completed with PVC(LSZH)jacket.


    inquirydetail
  • Premium Quality 24 Core Indoor Cable – GJFJH Break-Out Optical Fiber by FCJ OPTO TECH

    Premium Quality 24 Core Indoor Cable – GJFJH Break-Out Optical Fiber by FCJ OPTO TECH

    GJFJV 2-24 Tight indoor fiber optic cable is made by evenly applying strands of Aramid yarns or High strength glass yarns as the strength member over ф900μm or ф600μm tight buffer fibers and then is completed with PVC(LSZH)jacket.


    inquirydetail
  • High-Quality GJXFH 1 2 4 Core Indoor Fiber Optical Cable by Fcjoptic

    High-Quality GJXFH 1 2 4 Core Indoor Fiber Optical Cable by Fcjoptic

    Description

    The optical fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP/KFRP) are placed at the two sides. Then the cable is completed with a black or colored LSZH sheath.

    Characteristics

    · Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property;
    · Two parallel FRP strength members ensure good performance of crush resistance to protect the fiber;
    · Simple structure, light weight and high practicability;
    · Novel flute design, easily strip and splice, simplify the installation and maintenance;
    · Low smoke, zero halogen and flame retardant sheath.

    Optical Characteristics

    G.652 G.655 50/125μm 62.5/125μm
    @850nm ≤3.5 dB/km ≤3.5 dB/km
    @1300nm ≤1.5 dB/km ≤1.5 dB/km
    @1310nm ≤0.40 dB/km ≤0.40 dB/km
    @1550nm ≤0.30 dB/km ≤0.30dB/km
    @850nm ≥500 MHz·km ≥200 MHz·km
    @1300nm ≥500 MHz·km ≥500 MHz·km
    Numerical Aperture 0.200±0.015NA 0.275±0.015NA
    Cable Cut-off Wavelength ≤1260nm ≤1260nm

    Technical Parameters

    Fiber count CableDiameter

    mm

    		 CableWeight

    kg/km

    		 Tensile StrengthLong/Short Term N Crush ResistanceLong/Short

    Term

    N/100mm

    		 Bending Radius Static /Dynamic mm
    1 (2.0±0.2)×(3.0±0.2) 8 40/80 500/1000 20/40
    2 (2.0±0.2)×(3.0±0.2) 8 40/80 500/1000 20/40
    4 (2.0±0.2)×(3.0±0.2) 8 40/80 500/1000 20/40
    6 (2.5±0.2)×(4.0±0.2) 8.5 40/80 500/1000 20/40
    8 (2.5±0.2)×(4.0±0.2) 9.0 40/80 500/1000 20/40
    12 (3.0±0.2)×(4.0±0.2) 9.7 40/80 500/1000 20/40

    Storage/Operating  Temperature : -20℃ to + 60℃


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Model Number: GJXFH
  • Type: Fiber Optic Cable
  • Place of Origin: Zhejiang，China
  • Number of Conductors: 2
  • Product Name: ftth fiber optical drop cable indoor
  • Outer Jacket Material: LSZH
  • Strength Member: FRP
  • Fiber Model: Singlemode G657A1
  • Cable Diameter: (2.±0.2)*(3.0±0.2)mm
  • Package Type: Carton box/wooden reel

    • inquirydetail
  • High-Quality Indoor Fibre Cable: GJFJTC8Y 8C Optical Distributor

    High-Quality Indoor Fibre Cable: GJFJTC8Y 8C Optical Distributor

    Description

    GJFJTC8Y cable is made by evenly applying strands of Aramid yarns as the strength member over ф900μm or ф600μm fibers,twisting fibers with aramid yarn into the circular cable core,then steel wires assembled into the shape 8 PE sheath.

    Characteristics

    ·Small diameter, light weight and friendly
    ·High tensile strength of aramid yarn meet the requirements of self-supporting and reduce the installation cost.
    ·Good mechanical and temperature performance.

    Standards

    ·GJFJTC8Y cable complies with Standard YD/T11155-2011,YDT 1770-2008,IEC794 etc.

    Optical Parameters

    G.652

    G.655

    50/125μm

    62.5/125μm

    Attenuation

     (+20℃)

    @850nm

    ≤3.0dB/km

    ≤3.0dB/km

    @1300nm

    ≤1.0dB/km

    ≤1.0dB/km

    @1310nm

    ≤0.36dB/km

    ≤0.36dB/km

    @1550nm

    ≤0.22dB/km

    ≤0.23dB/km

    Bandwidth
    （Class A）

    @850

    ≥500MHZ·km

    ≥500MHZ·km

    @1300

    ≥1000MHZ·km

    ≥600MHZ·km
    Numerical Aperture

    0.200±0.015NA

    0.275±0.015NA
    Cable Cut-off Wavelength

    ≤1260nm

    ≤1480nm

    		 

    Technical Parameters

    Cable Type

    Fiber Count

    Cable Diameter

    mm

    Cable Weight
    Kg/km

    Tensile Strength

    Long/Short Term

    N

    Crush Resistance

    Long/Short

    Term
    N/100m

    Bending Radius
    Static/Dynamic

    mm

    GJFJTC8Y

    2

    3.5×5.5

    19

    200/400

    100/200

    30D/15D

    GJFJTC8Y

    4

    4.0×6.0

    26

    200/400

    100/200

    30D/15D

    GJFJTC8Y

    6

    5.0×7.0

    30

    200/400

    100/200

    30D/15D

    GJFJTC8Y

    8

    6.0×9.0

    32

    200/400

    100/200

    30D/15D

    GJFJTC8Y

    12

    6.5×9.5

    40

    200/400

    100/200

    30D/15D

    ·Storage/Operating temperature:-20℃～﹢60℃

     


    inquirydetail
  • High-Quality Indoor Fiber Optic Cable: 24 48 96 144 Core Multi-Mode Solutions

    High-Quality Indoor Fiber Optic Cable: 24 48 96 144 Core Multi-Mode Solutions

    Description

    GJFJV indoor fiber optic cable is made by evenly applying strands of Aramid yarns or High strength glass yarns as the strength member over ф900μm or ф600μm tight buffer fibers and then is completed with PVC(LSZH)jacket.

     

     


    inquirydetail
  • High-Quality FTTH Indoor Optical Cable Enhanced with KFRP Strength

    High-Quality FTTH Indoor Optical Cable Enhanced with KFRP Strength

    The optical fiber unit is positioned in the centre. Two parallel Fiber Reinforced Plastics (FRP/KFRP/STEEL) are placed at the two sides. A steel wire as the additional strength member is also applied. Then the cable is completed with a black or colored LSZH sheath.


    inquirydetail
  • Optic Fibre Power Connector: GYXTC8S Aerial Overhead Self-Supported Outdoor Armored Cable

    Optic Fibre Power Connector: GYXTC8S Aerial Overhead Self-Supported Outdoor Armored Cable

    The fibers, 250μm,are positioned in a loose tube made of a high modulus plastic, the tubes are filled with a water-resistant filling compound. The two sides PSP are longitudinally applied over the outer loose tube.  loose tubes filled with water proof compound to ensure compact and longitudinally water blocking ,this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene(PE) sheath to be figure 8 structure.


    inquirydetail
  • Enhanced Flexibility and Efficiency with Fcjoptic's Optical Power Composite Cable

    Enhanced Flexibility and Efficiency with Fcjoptic's Optical Power Composite Cable

    FCJ Copper/Fiber Composite cable consists of flexible stranded Copper conductors and integrating communications links utilizing Fiber Optic technologies.  The breakout design provides additional protection for both the copper and fiber channels by individually protecting each with insulated jackets and all-dielectric strength members.  For applications requiring remote low-voltage power and high-speed communications, these designs provide an efficient single-installation option where space is of a premium and devices are not easily accessed

    Optical Power Composite Cable ,the fibers 250μm,are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The cable core is FRP or metallic strength member( some structures need add PE as bedding layer in the strength member). Electric wires and tubes (and fillers) are stranded around the strength member into a compact and circular cable core. The cable core is filled with the filling compound to protect it from water ingress. After two sides PSP are longitudinally applied over the inner sheath ,the cable is completed with PE or LSZH outer sheath.


    inquirydetail
4877 Total
Leave Your Message