Hot Product

Featured

  • China Outdoor 24 48 Core GYTA53 Armoured Singlemode Fiber - The Next Generation in Fiber Optics

    China Outdoor 24 48 Core GYTA53 Armoured Singlemode Fiber - The Next Generation in Fiber Optics

    Description

    The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (PE) sheath.

    Characteristics

    · Good mechanical and temperature performance

    · High strength loose tube that is hydrolysis resistant

    · Special tube filling compound ensure a critical protection of fiber

    · Crush resistance and flexibility

    · PSP enhancing moisture-proof

    · Two parallel steel wires ensure tensile strength

    · Small diameter, light weight and friendly installation

    · Long delivery length

    Standards

    GYXTW cable complies with Standard YD/T 769-2003.

    Optical Characteristics

        G.652 G.655 50/125μm 62.5/125μm
    Attenuation

    (+20℃)

    		 @850nm     ≤3.0 dB/km ≤3.0 dB/km
    @1300nm     ≤1.0 dB/km ≤1.0 dB/km
    @1310nm ≤0.36 dB/km ≤0.40 dB/km    
    @1550nm ≤0.22 dB/km ≤0.23dB/km    
    Bandwidth

    (Class A)

    		 @850nm     ≥500 MHz·km ≥200 MHz·km
    @1300nm     ≥1000 MHz·km ≥600 MHz·km
    Numerical Aperture     0.200±0.015NA 0.275±0.015NA
    Cable Cut-off Wavelength ≤1260nm ≤1480nm    

    Technical Parameters

    Cable Type Fiber Count Cable Diameter

    (mm)

    		 Cable Weight kg/km Tensile Strength

     

    Long/Short Term N

    		 Crush Resistance

     

    Long/Short Term N/100mm

    		 Bending Radius

     

    Static/Dynamic

    mm
    GYXTW-2~12 2~12 10.0 105 600/1500 300/1000 10D/20D
    GY XTW-2~12 2~12 10.6 124 1000/3000 1000/3000 10D/20D

    Storage/Operating Temperature : -40℃ to + 70℃


    inquirydetail
  • Exceptional Quality 2core Outdoor Fiber Cable from Fcjoptic

    Exceptional Quality 2core Outdoor Fiber Cable from Fcjoptic

    Description

    The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. Over the tube, water-blocking material is applied to keep the cable watertight. Two parallel steel wires are placed at the two sides. The cable is completed with a polyethylene (PE) sheath.

    Characteristics

    · Good mechanical and temperature performance

    · High strength loose tube that is hydrolysis resistant

    · Special tube filling compound ensure a critical protection of fiber

    · Two parallel steel wires ensure tensile strength

    · PE sheath protects cable from ultraviolet radiation

    · Small diameter, light weight and friendly installation

    · Long delivery length

    Standards

    GYXY cable complies with Standard YD/T 769-2003.

    Optical Characteristics

    G.652

    G.655

    50/125μm

    62.5/125μm

    Attenuation

    (+20℃)

    @850nm

    ≤3.0 dB/km

    ≤3.0 dB/km

    @1300nm

    ≤1.0 dB/km

    ≤1.0 dB/km

    @1310nm

    ≤0.36 dB/km

    ≤0.40 dB/km

    @1550nm

    ≤0.22 dB/km

    ≤0.23dB/km

    Bandwidth

    (Class A)

    @850nm

    ≥500 MHz·km

    ≥200 MHz·km

    @1300nm

    ≥1000 MHz·km

    ≥600 MHz·km

    Numerical Aperture

    0.200±0.015NA

    0.275±0.015NA

    Cable Cut-off Wavelength

    ≤1260nm

    ≤1480nm

    Technical Parameters

    Cable Type Fiber Count Cable Diameter

    mm

    		 Cable Weight kg/km Tensile Strength

     

    Long/Short Term N

    		 Crush Resistance

     

    Long/Short Term N/100mm

    		 Bending Radius

     

    Static /Dynamic

    mm
    GYXY 2~12 9.5 90 600/1500 300/1000 10D/20D
    GYXY 2~12 10.2 100 1000/3000 1000/3000 10D/20D

    Storage/Operating Temperature : -40℃ to + 70℃


    inquirydetail
  • "High-Quality Outdoor Fiber Drop Cable: Micro-Duct GCYFY Single Mode from Fcjoptic"

    "High-Quality Outdoor Fiber Drop Cable: Micro-Duct GCYFY Single Mode from Fcjoptic"

    Description

    The fibers,250μm, either of single-mode or multimode type, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A layer of aramid yarn or high strength glass is applied around the cable core as additional strength member. Then, the cable is completed with a black or color HDPE sheath.

    Characteristics

    ·Non-mental design can prevent the cable from radio interference and magnetic wave interference
    ·Specially designed compact structure is good at preventing loose tubes from shrinking
    ·Aramid yarn ensures good performance of tensile strength
    ·Loose tube filling compound ensure good moisture resistance performance
    ·Good flexibility
    ·High dense fiber packed, small diameter and light weight; it’s the better option for blowing installation process

    Application

    Adopted to backbone network, access network and fiber to the home.

    Optical Characteristics

    G.652

    G.655

    50/125μm OM2

    62.5/125μm

    Attenuation

    (+20℃)

    @850nm

    ≤3.0 dB/km

    ≤3.0 dB/km

    @1300nm

    ≤1.0 dB/km

    ≤1.0 dB/km

    @1310nm

    ≤0.36 dB/km

    ≤0.40 dB/km

    @1550nm

    ≤0.22 dB/km

    ≤0.23dB/km

    Bandwidth (Class A)

    @850nm

    ≥500 MHz·km

    ≥200 MHz·km

    @1300nm

    ≥1000 MHz·km

    ≥600 MHz·km

    Numerical Aperture

    0.200±0.015NA

    0.275±0.015NA

    Cable Cut-off Wavelength

    ≤1260nm

    ≤1480nm

    Technical Parameters

    Cable Type Fiber Count Cable Diameter

    (mm)

    		 Cable Weight kg/km Tensile Strength

     

    Long/Short Term N

    		 Crush Resistance

     

    Long/Short Term N/100mm

    		 Bending Radius

     

    Static/Dynamic

    mm
    JET 2~12 6.0+0.2 30 150/300 200/500 15D/30D

    Storage/Operating Temperature : -40℃ to + 70℃


    inquirydetail
  • Exceptional Outdoor Optical Fiber Cable - Self-Supporting Miniature Fig8 12-24 Core Cable

    Exceptional Outdoor Optical Fiber Cable - Self-Supporting Miniature Fig8 12-24 Core Cable

    Description

    Mini F-SST contains mini F-SST as optical fiber unit, which promotes maximum core to 24. According to different applications, it is jacketed by LSZH, PE or PA. Mini F-SST cable has small size and low weight. With perfect mechanical performance and wide temperature and wide temperature range, it can withstand the strong pressure. And is suitable for indoor cabling, pipelines and ground slot laying.

    Construction

    Single mode, multimode optical fiber, maximum of 24 cores F-SST LSZH, PE, or PA jacketing, anti-ultraviolet radiation

    Small size and low weight
    Good mechanical performance, withstanding the tensile force and force and super pressure
    Waterproof, moisture-proof, anti-rodents,no rusty
    Resistance to acid, alkali, salt corrsion
    Non-toxic, flame retardant, fire and explosion proof
    Outstanding high and low temperature performances

    Characteristics

    Small size and low weight
    Good mechanical performance, withstanding the tensile force and force and super pressure
    Waterproof, moisture-proof, anti-rodents,no rusty
    Resistance to acid, alkali, salt corrsion
    Non-toxic, flame retardant, fire and explosion proof
    Outstanding high and low temperature performances
    With excellent fire resistance, it can keep communication in the fire(800℃) more than 2 hours with normal optical fiber

    Application

    Indoor cabling
    Pipe laying
    Ground slot laying
    Temperature sensing cable
    Fire monitoring

    Temperature Range

    Operating temperature: -60~+80℃
    Storage temperature: -60~+80℃

    Min.Bending Radius

    Static=10D

    Dynamic=20D

    Replacement

    GYTA, GYTS, GYXTW, GYXTC8S, GYTC8S

    Fiber core number

    structure size

    Cable weight

    Allowable tensile force (N)

    Allowing crush force (N)

    Pipe diameter

    Wire diameter

    Cable diameter

    kg / km

    Long-term / short-term

    Long-term / short-term

    4

    1.35

    0.3

    3.95

    18.4

    500/1000

    2000/4000

    6

    1.5

    0.45

    4.6

    26.3

    1000/2000

    2000/4000

    8

    1.8

    0.45

    4.9

    29.2

    1000/2000

    2000/4000

    12

    2

    0.45

    5.1

    31.2

    1000/2000

    2000/4000

    24

    2.4

    0.5

    6

    41.1

    1000/2000

    2000/4000

    inquirydetail
  • High-Quality 12-Core Outdoor Optical Cable Singlemode Fiber Optic MPO/MTP Pigtail

    High-Quality 12-Core Outdoor Optical Cable Singlemode Fiber Optic MPO/MTP Pigtail

    Optical fiber active connector is a plug-in connector based on a single-core plug and adapter.According to the connector, it can be divided into FC, SC, LC, ST, MU, etc.PC, UPC, APC, etc.Suitable for optical fiber transceiver, router, switch, optical terminal machine and other equipment with optical ports.Fiber connectors are widely used and play an important role in optical fiber links.


    inquirydetail
  • PLC Splitter 0.9mm Without Connector for Singlemode 12 Core Fiber Optics

    PLC Splitter 0.9mm Without Connector for Singlemode 12 Core Fiber Optics

    Optical fiber active connector is a plug-in connector based on a single-core plug and adapter.According to the connector, it can be divided into FC, SC, LC, ST, MU, etc.PC, UPC, APC, etc.Suitable for optical fiber transceiver, router, switch, optical terminal machine and other equipment with optical ports.Fiber connectors are widely used and play an important role in optical fiber links.


    inquirydetail
  • Unparalleled 1X8 PLC Splitter: FCJOptic's Single-Mode Fiber Optics Interface Solution

    Unparalleled 1X8 PLC Splitter: FCJOptic's Single-Mode Fiber Optics Interface Solution

    (Rack type: No connector, SC/UPC, SC/APC…FC can be choosen).PLC (Planar Lightwave Circuit) splitters are Single Mode Splitters with an even split ratio from one input fiber to multiple output fibers. It is based on planar lightwave circuit technology and provides a low cost light distribution solution with small form factor and high reliability. We provide a various of 1×N and 2×N PLC splitters, including 1×2 to 1×64 and 2×2 to 2×64 1U Rack Mount type fiber PLC splitters. They are all with superior optical performance, high stability and high reliability to meet various application requirements.
    The 1U Rack Mount type adopts 1U frame, or customize according to actual requirement. It can be installed in ODF canonically and syncretize with appreance of box/ cabinet body via canonical fiber distribution. 1xN, 2xN 1U Rack Mount Fiber PLC Splitter supports SC, LC, FC connectors for choice.


    inquirydetail
  • High-Quality Fiber Optical PLC Splitter: Cassette Module PLC Splitter by fcjoptic

    High-Quality Fiber Optical PLC Splitter: Cassette Module PLC Splitter by fcjoptic

    Cassette Splitter (Insert type PLC Fiber Splitter) 1x(2,4…128) or 2x(2,4…128) (Insert type: SC/UPC, SC/APC… can be choosen).Planar Lightwave Circuit (PLC) Splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.


    inquirydetail
  • ABS PLC Splitter: Versatile Fiber Optic Termination Box for Indoor/Outdoor FTTH Applications

    ABS PLC Splitter: Versatile Fiber Optic Termination Box for Indoor/Outdoor FTTH Applications

    Blockless Splitter (FDB) series are applicable in FTTH project and suitable for outdoor application. They can distribute cables with a splitter. They have the subsequent functions of mechanical splice, fusion splice, distributions, etc. Note: This box comes with splice tray, but no any adapters, pigtails or fiber splitters.


    inquirydetail
  • Unparalleled PLC Splitter Without Connector from fcjoptic - Excellence in Connectivity

    Unparalleled PLC Splitter Without Connector from fcjoptic - Excellence in Connectivity

    Bare Splitter no Connector 1x(2,4…128) or 2x(2,4…128). Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. Bare fiber splitter is a kind of ODN product suitable for PON networks that can be installed in the pigtail cassette, test instrument and WDM system, which minimizes the space occupation. It is relatively fragile on fiber protection and need a complete protection design on carrying box body and device.


    inquirydetail
  • Superior Quality PLC Splitter 1X8 in ABS Box Type - Ideal for Single Mode Fiber Optics

    Superior Quality PLC Splitter 1X8 in ABS Box Type - Ideal for Single Mode Fiber Optics

    1x(2,4…128) or 2x(2,4…128) ( ABS Box type PLC Fiber Splitter : No connector, SC/UPC, SC/APC…FC can be choosen).Planar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations. Pigtailed ABS splitter is most commonly used in the PON networks. It provides the complete protection for inner optical components and cable, as well as designed for the convenient and reliable installation, but its volume is relatively large. It’s mainly used for various connection and distribution products(outdoor fiber distribution box) or network cabinets. (ABS type: No connector, SC/UPC, SC/APC…FC can be choosen).


    inquirydetail
  • Optimize Your Network with FCJOptic's 1X16 PLC Splitter Featuring 12 Core Fiber Optic MPO/MTP Pigtail

    Optimize Your Network with FCJOptic's 1X16 PLC Splitter Featuring 12 Core Fiber Optic MPO/MTP Pigtail

    Optical fiber active connector is a plug-in connector based on a single-core plug and adapter.According to the connector, it can be divided into FC, SC, LC, ST, MU, etc.PC, UPC, APC, etc.Suitable for optical fiber transceiver, router, switch, optical terminal machine and other equipment with optical ports.Fiber connectors are widely used and play an important role in optical fiber links.


    inquirydetail
4877 Total
Leave Your Message