Optical Power Composite Cable

  • Optical Power Composite Cable Optic Fiber Cable Optoelectronic Hybrid Cable

    Optical Power Composite Cable Optic Fiber Cable Optoelectronic Hybrid Cable

    FCJ Copper/Fiber Composite cable consists of flexible stranded Copper conductors and integrating communications links utilizing Fiber Optic technologies.  The breakout design provides additional protection for both the copper and fiber channels by individually protecting each with insulated jackets and all-dielectric strength members.  For applications requiring remote low-voltage power and high-speed communications, these designs provide an efficient single-installation option where space is of a premium and devices are not easily accessed

    Optical Power Composite Cable ,the fibers 250μm,are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The cable core is FRP or metallic strength member( some structures need add PE as bedding layer in the strength member). Electric wires and tubes (and fillers) are stranded around the strength member into a compact and circular cable core. The cable core is filled with the filling compound to protect it from water ingress. After two sides PSP are longitudinally applied over the inner sheath ,the cable is completed with PE or LSZH outer sheath.


    inquirydetail
  • GYXTC8S Aerial Overhead Self Supported 12 Or 24 Core Singlemode Outdoor Armored Fiber Optical Cable

    GYXTC8S Aerial Overhead Self Supported 12 Or 24 Core Singlemode Outdoor Armored Fiber Optical Cable

    The fibers, 250μm,are positioned in a loose tube made of a high modulus plastic, the tubes are filled with a water-resistant filling compound. The two sides PSP are longitudinally applied over the outer loose tube.  loose tubes filled with water proof compound to ensure compact and longitudinally water blocking ,this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene(PE) sheath to be figure 8 structure.


    inquirydetail
  • Armored GYFTY53 Stranded Loose Tube 12 24 48 72 Core Cable Optical Fiber For Optical Power Meter

    Armored GYFTY53 Stranded Loose Tube 12 24 48 72 Core Cable Optical Fiber For Optical Power Meter

    1.GYFTY53 uses a Fiber Reinforced Plastic (FRP) as central strength member to provides anti-electromagnetic interference property.

    2.The armored structure protects the cable from rat bite and moisture proof.

    3.The tubes (and fillers) are stranded around the strength member into a compact and circular core.

    4.Then the cable core is covered with a thin polyethylene (PE) inner sheath, which is filled with jelly to protect it from water ingress.

    5.A layer of water-blocking material is applied around the cable core to prevent water ingress.


    inquirydetail
  • GYFXY Non-Metallic Unitube Non-Armored Gyfxy Fiber Optic Cable For Aerial Outdoor

    GYFXY Non-Metallic Unitube Non-Armored Gyfxy Fiber Optic Cable For Aerial Outdoor

    GYFXY Non-metallic ,The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. Over the tube. water-blocking material is applied to keep the cable watertight. Two parallel Fiber Reinforced Plastics (FRP) are placed at the two side. The cable is completed with a polyethylene(PE) sheath.


    inquirydetail
  • GYTA China Suppliers Multi Core Armoured Outdoor Fiber Optic Cable

    GYTA China Suppliers Multi Core Armoured Outdoor Fiber Optic Cable

    GYTA Outdoor ,The fibers, 250μm,are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then, the cable is completed with a PE sheath.


    inquirydetail
  • Fast Delivery Jet Micro Cable SingleMode Fiber Optic Cable For Duct&Aerial Installation

    Fast Delivery Jet Micro Cable SingleMode Fiber Optic Cable For Duct&Aerial Installation

    The fibers,250μm, either of single-mode or multimode type, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A layer of aramid yarn or high strength glass is applied around the cable core as additional strength member. Then, the cable is completed with a black or color HDPE sheath.So this is Light-armored Communication Cable.


    inquirydetail
  • Outdoor Armored Cable GYFTA53 48B1.3 Outdoor Armored Cable For Direct Burial

    Outdoor Armored Cable GYFTA53 48B1.3 Outdoor Armored Cable For Direct Burial

    Outdoor Armored Cable GYFTA53 ,The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core. Then the cable core is covered with a thin polyethylene (PE) inner sheath, which is filled with jelly to protect it from water ingress.  After a corrugated steel tape armor is applied, the cable is completed with a PE outer sheath.


    inquirydetail
  • GYFTC8S Aerial High Quality Outdoor Fig-8 Fiber Optic Cable With Layer Filling Loose Tube

    GYFTC8S Aerial High Quality Outdoor Fig-8 Fiber Optic Cable With Layer Filling Loose Tube

    The GYFTC8S Aerial fibers,  The fibers,  250μm , are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. FRP locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular cable core. After an Steel tape (SPS) moisture barrier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene (PE) sheath to be figure 8 structure.


    inquirydetail
  • GYTA53 Outdoor Double Armored Double Jackets Stranded Loose Tube Fiber Optic Cable

    GYTA53 Outdoor Double Armored Double Jackets Stranded Loose Tube Fiber Optic Cable

    GYTA53 Armored ,The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. The cable core is filled with the filling compound to protect it from water ingress, over which a thin PE inner sheath is applied. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.


    inquirydetail
  • GYTC8A Outdoor Figure-8 Aerial Fiber Optic Cable With Aluminium Corrugated Tape

    GYTC8A Outdoor Figure-8 Aerial Fiber Optic Cable With Aluminium Corrugated Tape

    GYTC8A is a typical self supporting outdoor fiber optic cable with features of moisture resistance and crush resistance suitable for aerial application.The  stranded wires as the supporting part are completed with a polyethylene(PE) sheath to be figure 8 structure. Aluminum tape armored and PE outer sheath provide crush resistance and gun shot resistance features. The steel-wire as the central strength improves the tensile strength and it is surrounded by the loose tube and water blocking system. The impact structure ensures excellent mechanical and environmental performance.Both single mode type and multimode types are available. Various lengths and fiber number can be customized according to customers’ requirements.


    inquirydetail
  • GYTC8S Figure 8 FTTH Fibra Optica Cable With Steel Messenger GYTC8S

    GYTC8S Figure 8 FTTH Fibra Optica Cable With Steel Messenger GYTC8S

    Cable Specification: 

    Item Name:Fiber optical cable GYTC8S
    Optical Mode:Singlemode/Multimode
    Fiber Diameters:G652, G655, 50/125μm, 62.5/125μm
    Total Fiber Count:2-144
    Bend Radius(Static/Dynamic):10D/20D
    Working Life:More than 25 years

    Application:Aerial self-supporting,Local network,Local network,Long distance network communication.


    inquirydetail
  • GYTS Light-Armored Outdoor Stranded Loose Tube Optical Fiber Cable

    GYTS Light-Armored Outdoor Stranded Loose Tube Optical Fiber Cable

    GYTS Light-armored ,as been designed for long haul / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunication grade optical fiber. GYTS Light-Armored Outdoor Stranded Loose Tube Optical Fiber Cable are designed for easy and economical installation.

    Excellent optical, mechanical & environmental performance
    High strength-to-weight ratio
    High tensile strength
    High crush strength
    Corrosion resistance
    Very light weight
    Very flexible  bending radius


    inquirydetail
17 Total
Leave Your Message